Poli Wash & Seal™

Silica Wash for Ceramics Coatings

Poli Wash & Seal™ is a specially formulated wash that is infused with advanced silica technology. Each wash cleans your vehicle and deposits a thin layer of protective polymers that will revitalize the coated surfaces. It is a pH-neutral shampoo specifically crafted to clean vehicles with existing ceramic coatings while enhancing their protective performance.

While optimized for coated vehicles, Poli Wash & Seal™ also works on non-coated cars, Boats, and RV's, gradually building layers of protection and enhancing gloss and water beading over time. Produces rich, stable foam that safely lifts dirt and contaminants while lubricating the surface to prevent scratches. Its jade color, fruity scent, and pearlescent finish make washing your vehicle a premium experience.

Water beading begins to appear approximately 24 hours after application.

✨2-in-1 Formula – Cleans and seals in a single step

✨ Extreme gloss,Mirror-like shine with a just-waxed appearance

✨ Adds a hydrophobic, protective layer after 24-hour cure

✨ pH-neutral formula safely lifts dirt and contaminants

✨ Thick, luxurious foam gently cleans while boosting shine

✨ Silica-based polymers revive coatings and enhance water beading

✨ Safe for use over waxes, sealants, and existing ceramic coatings

✨ Rinses clean with no streaks

**Directions for Use:**

For Hand Washing

1. Pour 1–3 oz of Poli Wash & Seal™ into a 5-gallon bucket
2. Fill with water to create suds
3. Wash the surface with a soft cloth, brush, or wash mitt
4. Rinse thoroughly with fresh water
5. Allow 24 hours to cure for full hydrophobic effect

For Foam Cannon

1. Premix with water at ¼–½ oz per gallon, or dilute 1:200–1:300 with water.
2. Pour 1–3 oz into a 5-gallon pail.
3. Fill the pail with pressurized water to generate suds.
4. Wash the surface with a brush or mitt.
5. Rinse thoroughly with fresh water.