This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

7" Chamois Applicator

The Original Poli Glow® Applicator

To get a streak-free, uniform shine when applying Poli Glow you need the right applicator. A simple rag won’t cut it.

The 7” Chamois applicator is a classic absorbent chamois that provides a simple method to apply Poli Glow®. It’s also our OG applicator.

The sponge back provides a softer base to work around surface contours and optimize the application of PoliGlow®.  

The 7” Chamois applicator keeps thePoliGlow®application process as quick and simple as possible.

🪜 Attaches to an extension pole for out-of-reach areas

🚯 Avoid the waste of disposable gloves, towels, and cloths

✅ Easy cleanup

💸 MakesPoliGlow®go farther

Get a #glossthatsboss with the originalPoliGlow®applicator.

💡 Interested in other options for applying Poli Glow®? Check out our Poli-Mitt™ applicator, which we also include with all our kits.

Application Instructions

Directions for use:

  1. Remove the 7” Chamois from the applicator by releasing the velcro straps. Moisten with water and wring out so that it is damp and not soaked. Reattach the chamois to the block.
  2. Shake well, and drizzle several lines of Poli Glow® onto the 7” Chamois applicator. Do not soak the applicator.
  3. Apply Poli Glow® as directed in the Poli Glow® Application and Maintenance Guide
  4. If dirt and debris become embedded into the chamois, or Poli Glow® hardens along the edges, follow the directions below to clean it before resuming the Poli Glow® application.

Directions for cleaning:

  1. After the application of Poli Glow®, rinse the applicator thoroughly with clean, fresh water. You can wash the chamois and block independently by removing the chamois from the block by loosening the velcro straps.
  2. Wash the chamois in a bucket with a few ounces of Poli Prep™ and a few gallons of water. A small amount of Poli Wash Pro™ may be used to loosen and remove dirt and oils. Do not use bleach or fabric softeners.
  3. If Poli Glow® has hardened onto the chamois during use, this can cause streaks. Mist the chamois with a diluted solution of the Poli Prep™ or with Poli Strip™ concentrate to loosen the Poli Glow® and rinse with water.

Frequently asked questions

Directions for use:
  1. Remove the 7” Chamois from the applicator by releasing the velcro straps. Moisten with water and wring out so that it is damp and not soaked. Reattach the chamois to the block.
  2. Shake well, and drizzle several lines of Poli Glow® onto the 7” Chamois applicator. Do not soak the applicator.
  3. Apply Poli Glow® as directed in the Poli Glow® Application and Maintenance Guide
  4. If dirt and debris become embedded into the chamois, or Poli Glow® hardens along the edges, follow the directions below to clean it before resuming the Poli Glow® application.

Directions for cleaning:

  1. After the application of Poli Glow®, rinse the applicator thoroughly with clean, fresh water. You can wash the chamois and block independently by removing the chamois from the block by loosening the velcro straps.
  2. Wash the chamois in a bucket with a few ounces of Poli Prep™ and a few gallons of water. A small amount of Poli Wash Pro™ may be used to loosen and remove dirt and oils. Do not use bleach or fabric softeners.
  3. If Poli Glow® has hardened onto the chamois during use, this can cause streaks. Mist the chamois with a diluted solution of the Poli Prep™ or with Poli Strip™ concentrate to loosen the Poli Glow® and rinse with water.

Customer Reviews

Based on 27 reviews
96%
(26)
4%
(1)
0%
(0)
0%
(0)
0%
(0)
C
C. H.
Use the applicator, not the mitt!

I have been using Polyglow for 10 or more years now. As a comercial fisherman in Maine my boat is in the water and fishing year round, only hauling it out for a couple of days for annual maintenance. First let me say the product works great at keeping the hull looking like new as long as you follow the instructions. Second, when it comes time to remove the old polyglow use Zep floor wax stripper. You will hate yourself if you try the polyglow stripper. Finally I have used both the 7" applicator and the mitt. The mitt is faster but the product doesn't last as long on the hull. On a 40' boat I don't have time to get it 10+ coats. 5 coats with the applicator will do the same job. I hope this review helps.

M
Michael M.
This applicator is far better than the mitt provided with the kit

This applicator is far better than the mitt provided with the kit. It puts on thinner coats and alleviates the build up of noticeable poliglow streaks. It also will grab some of the bugs and other dust items that accumulate on the surface as you're applying the poli-glow. I put water in a spray bottle, in fact, we had no water in yard at marina so I used lots of water in spray bottles and many, many towels, but I kept misting the applicator once every 3-5 linear feet of hull. This helped eliminate any build up and start and stop marks from the application. There's lots of positive and negative feedback on poli-glow. Removing old poli-glow was not fun. We had to use poli-strip and an orbital sander...however when reapplying I was stopped by many observers asking what I was applying to the hull because it had an incredible shine. It helped that the hull was very chalky prior to application due to the sanding. Even some of the marina employees were shocked how good it looked and how effortless the application was. Apparently they didn't watch me strip the old poli-glow! Be careful not to sand through the gel coat. I definitely recommend the applicator and poli-glow.

S
Steve G.
Phenomenal!

Great with a mop handle screwed into it for easily applying Poli-Glow to hull of my 40' Chris Crafy

J
Jennifer S.
Wonderful!

I originally bought this to apply the poli glow on the parts I couldn't reach without a latter but I will probably use this to dry areas on boats and campers I can't reach.

R
Robert T.
Spectacular!

Easy to use and the camper looks amazing..
Very nice product..!!👍

A
Amazon C.
It worked

Works better than the mitt

E
Ed B.
Works well

Works well with the poly glow.

L
Leonard H.
Great product

Works great

C
Charles A.D.
Apply in 1 direction. Goes on easy.

This stuff really works. About 6-8 coats. It goes on really easy.

J
JD
Five Stars

Awesome Product :)

Search