This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

Poli Glow® Deluxe Boat Restoration Kit

Superior Marine Polish and Gelcoat Restoration

Poli Glow® is a fiberglass gelcoat restoration solution that’s changing how boat owners care for their crafts.

Our proprietary formula restores the gelcoat on your fiberglass boat, protecting it against oxidation, dirt, oil, moisture, and harmful UV radiation.

Most importantly, it gives your boat a high-gloss shine that will have all your friends asking for your secret.

This kit has everything you need to restore the gelcoat on a boat with moderate to severe oxidation and give it a “factory shine.”

🧼 Removes heavy oxidation and stains

✨ Restores a high-gloss, “factory” shine

☀️ UV inhibitors protect against sun damage

💔 Protects decals from cracking and fading

💦 Repels water

😎 Easy application—no buffers needed (looking at you, boat wax!)

🗓️ Long-lasting—maintains a shine for years with minimal annual maintenance

What’s in the kit:

  • 32 oz. bottle Poli Glow®: Poli Glow® is a revolutionary boat polish and restorer that penetrates and seals the gelcoat on your fiberglass, protecting it against oxidation, dirt, oil, moisture, and harmful UV radiation.

  • 16 oz. bottle Poli Ox™: Poli Ox™ is a concentrated cleaning formula containing oxalic acid that removes moderate to heavy oxidation, stains, grime, old wax, spray on ceramics, and mold without damaging the gelcoat surface or vinyl decals. 

  • 32 oz. bottle of Poli Prep™: Poli Prep™ is our concentrated cleaning formula used to create a clean and uniform surface for the application ofPoli Glow®. It helps to safely remove oxidation, stains, grime, old wax and spray on ceramics.

  • The Poli-Mitt™ Applicator: This applicator is a special mitt used specifically for Poli Glow®.

  • Non-Abrasive Scrub Pad with Handle: This white scrub pad is a non-abrasive and easy-to-use product designed to quickly remove oxidation, dirt and grime, light staining, mold, mildew, and black streaks when used with Poli Prep™.

  • Ultra-Fine Sanding Pad: This pad is equivalent to 1200 wet/dry sandpaper but is more durable. There are two sanding pads included in this package, each 4.5"x 6".

We designed Poli Glow® to be a longer-lasting, glossier, and more complete restoration treatment than boat wax.

🛥️ Coverage: One kit covers up to a 28-foot boat, or about 350 square feet of surface. For larger surfaces, you will need additional kits.

🥂 First time ordering? You’ve made a great choice. This is our most complete kit, and the most popular order for new customers.

Product Description
When to Purchase
Application Instructions
Maintenance Instructions

25 years ago, our founder asked a simple question:

Is there a better way to prevent fading and restore shine to boats than boat wax?

After years of experimenting in his Florida backyard, he eventually developed the proprietary formula for Poli Glow®.

The water-based acrylic polymer binds to the gelcoat on your fiberglass surface to prevent damage and create a durable, glossy finish.

But before applying Poli Glow’s high-gloss shine, it’s important to first remove the stains, grime, and discoloration that have accumulated from use and the elements.

This process is called “oxidation,” and it’s the cause of the fading and discoloration you notice on all boats with time.

The Poli Glow® Deluxe Kit provides you with all the tools you need to remove moderate to severe oxidation, then coat your boat with the most brilliant shine on the market.

Transform the look of an aging, faded boat by returning its original colors and shine. You’ll also slow down future oxidation from dirt, oil, moisture, and harmful UV radiation.

Unlike waxing, you don’t have to use buffers to apply Poli Glow®—just wipe it on with the Poli-Mitt Applicator™ and let it dry. Poli Glow® lasts for years with proper maintenance instead of growing cloudy and faded after only a few months.

For over 25 years, Poli Glow® has been restoring and protecting boats all over the world, keeping them looking glossy and new.

Experience the #glossthatsboss for yourself.

Please note: Poli Prep™ and Poli Ox™, which are included in this kit, are safe for use on the following surfaces:

  • Fiberglass
  • Gelcoat
  • Clearcoat
  • Metals
  • Glass
  • Rubber
  • Plastic
  • Vinyl decals
  • Most automotive or fortified paints


Poli Prep™ and Poli Ox™ are not safe for use on the following surfaces:
  • Brand new, unoxidized surfaces that still have a gloss
  • Household acrylic and urethane based paints
  • Ink printed or silk-screen decals and graphics

The Poli Glow® Deluxe Kit has everything you need to deal with a boat that has moderate to severe levels of oxidation and restore its shine. It’s our most popular kit for a reason.

When to purchase the Poli Glow® Deluxe Kit:

The Poli Glow® Deluxe Kit has everything you need to deal with a boat that has moderate to severe levels of oxidation and restore its shine. It’s our most popular kit for a reason.

For first time applications, you must remove any oxidation by preparing the surface with Poli Prep™ and Poli Ox™ before applying Poli Glow®.

A properly prepared surface should look uniformly dull, without color changes or blotches. Some of the colors will still appear bleached or faded until Poli Glow has been applied.

If you are applying maintenance coats of Poli Glow®, wash and dry the surface first with Poli Wash™. Remove any waxes or spray on ceramics by adding Poli Wash Pro™.

General application instructions:

  • Do not apply in the rain or on windy days

  • Avoid direct sunlight if possible

  • Ambient temperature should be between 65 and 90 degrees fahrenheit

  • Low to mid humidity—high humidity can cause the product to streak if not dry

  • Keep out of rain for 48 hours after application


Application steps:
  1. Put on disposable gloves to protect your hands.
  2. Cover ink-printed or silk-screen decals and graphics with plastic and tape.
  3. Wet the surface of your boat with water.
  4. Dilute the Poli Prep™ concentrate 3:1 water to product in a trigger spray bottle. Spray the solution onto the surface and scrub vigorously with the non-abrasive scrub pad, then rinse thoroughly with water.
  5. Repeat as necessary until oxidation has been removed.
  6. For stubborn areas, moisten the ultra-fine sanding pad with water and sprinkle Poli Ox™ onto the wet pad. Scrub the fiberglass or gelcoat vigorously, and more gently over the decals.
  7. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached until Poli Glow® has been applied.
  8. If any residue of Poli Ox™ remains, take a few ounces of Poli Prep® or Poli Wash™ in a bucket with 3-5 gallons of water and wash the surface with a soft-bristled brush. Rinse well with water.
  9. Let your boat air dry or use our 550 GSM Microfiber Towel to dry your boat.
  10. Moisten the Poli-Mitt™ Applicator with water and wring it out so that it is damp and not soaked.
  11. Shake well, and drizzle several lines of Poli Glow® onto the Poli-Mitt™ Applicator. Wring gently to evenly distribute the Poli Glow®. Do not soak the mitt.
  12. Apply Poli Glow® in vertical or horizontal strokes (not circles) and work in four to six foot sections.
  13. Poli Glow® should be applied in thin coats, allowing several minutes for each coat to dry in between applications. Apply the next coat when the surface is not tachy and doesn’t feel wet, about 1-2 minutes.
  14. Allow to cure for 48 hours.


The recommended number of coats of Poli Glow® to apply depends on the UV index where you live. In general, you will need at least 6-8 coats for a first-time application.

Please refer to the Poli Glow® Application and Maintenance Guide for detailed guidance.

At least once per year, wash your boat with Poli Wash™, treat any oxidation spots, and re-apply 3-4 coats of Poli Glow® to maintain your glossy shine.

When Poli Glow® is first applied, it can last up to a year or more in certain
conditions.

However, Poli Glow® was never meant to be a one-time application. Eventually, the Poli Glow® surface will oxidize like any other product or structure left out in the elements (albeit more slowly than alternatives).

The reason to regularly maintain the Poli Glow® finish is to prevent oxidation and the need to do heavier work when it does finally break down.

If maintained properly, Poli Glow® can last five to six years, and the heavier work
can be avoided.

Where you live determines how often you should apply maintenance coats. Boats in tropical climates require more frequent maintenance than boats in temperate ones.

Please refer to the Poli Glow® Application and Maintenance Guide for detailed guidance and to review our Poli Glow® Coverage Chart.

Frequently asked questions

25 years ago, our founder asked a simple question:

Is there a better way to prevent fading and restore shine to boats than boat wax?

After years of experimenting in his Florida backyard, he eventually developed the proprietary formula for Poli Glow®.

The water-based acrylic polymer binds to the gelcoat on your fiberglass surface to prevent damage and create a durable, glossy finish.

But before applying Poli Glow’s high-gloss shine, it’s important to first remove the stains, grime, and discoloration that have accumulated from use and the elements.

This process is called “oxidation,” and it’s the cause of the fading and discoloration you notice on all boats with time.

The Poli Glow® Deluxe Kit provides you with all the tools you need to remove moderate to severe oxidation, then coat your boat with the most brilliant shine on the market.

Transform the look of an aging, faded boat by returning its original colors and shine. You’ll also slow down future oxidation from dirt, oil, moisture, and harmful UV radiation.

Unlike waxing, you don’t have to use buffers to apply Poli Glow®—just wipe it on with the Poli-Mitt Applicator™ and let it dry. Poli Glow® lasts for years with proper maintenance instead of growing cloudy and faded after only a few months.

For over 25 years, Poli Glow® has been restoring and protecting boats all over the world, keeping them looking glossy and new.

Experience the #glossthatsboss for yourself.

Please note: Poli Prep™ and Poli Ox™, which are included in this kit, are safe for use on the following surfaces:
  • Fiberglass
  • Gelcoat
  • Clearcoat
  • Metals
  • Glass
  • Rubber
  • Plastic
  • Vinyl decals
  • Most automotive or fortified paints


Poli Prep™ and Poli Ox™ are not safe for use on the following surfaces:
  • Brand new, unoxidized surfaces that still have a gloss
  • Household acrylic and urethane based paints
  • Ink printed or silk-screen decals and graphics
The Poli Glow® Deluxe Kit has everything you need to deal with a boat that has moderate to severe levels of oxidation and restore its shine. It’s our most popular kit for a reason.

When to purchase the Poli Glow® Deluxe Kit:

The Poli Glow® Deluxe Kit has everything you need to deal with a boat that has moderate to severe levels of oxidation and restore its shine. It’s our most popular kit for a reason.
For first time applications, you must remove any oxidation by preparing the surface with Poli Prep™ and Poli Ox™ before applying Poli Glow®.

A properly prepared surface should look uniformly dull, without color changes or blotches. Some of the colors will still appear bleached or faded until Poli Glow has been applied.

If you are applying maintenance coats of Poli Glow®, wash and dry the surface first with Poli Wash™. Remove any waxes or spray on ceramics by adding Poli Wash Pro™.

General application instructions:
  • Do not apply in the rain or on windy days

  • Avoid direct sunlight if possible

  • Ambient temperature should be between 65 and 90 degrees fahrenheit

  • Low to mid humidity—high humidity can cause the product to streak if not dry

  • Keep out of rain for 48 hours after application


Application steps:
  1. Put on disposable gloves to protect your hands.
  2. Cover ink-printed or silk-screen decals and graphics with plastic and tape.
  3. Wet the surface of your boat with water.
  4. Dilute the Poli Prep™ concentrate 3:1 water to product in a trigger spray bottle. Spray the solution onto the surface and scrub vigorously with the non-abrasive scrub pad, then rinse thoroughly with water.
  5. Repeat as necessary until oxidation has been removed.
  6. For stubborn areas, moisten the ultra-fine sanding pad with water and sprinkle Poli Ox™ onto the wet pad. Scrub the fiberglass or gelcoat vigorously, and more gently over the decals.
  7. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached until Poli Glow® has been applied.
  8. If any residue of Poli Ox™ remains, take a few ounces of Poli Prep® or Poli Wash™ in a bucket with 3-5 gallons of water and wash the surface with a soft-bristled brush. Rinse well with water.
  9. Let your boat air dry or use our 550 GSM Microfiber Towel to dry your boat.
  10. Moisten the Poli-Mitt™ Applicator with water and wring it out so that it is damp and not soaked.
  11. Shake well, and drizzle several lines of Poli Glow® onto the Poli-Mitt™ Applicator. Wring gently to evenly distribute the Poli Glow®. Do not soak the mitt.
  12. Apply Poli Glow® in vertical or horizontal strokes (not circles) and work in four to six foot sections.
  13. Poli Glow® should be applied in thin coats, allowing several minutes for each coat to dry in between applications. Apply the next coat when the surface is not tachy and doesn’t feel wet, about 1-2 minutes.
  14. Allow to cure for 48 hours.


The recommended number of coats of Poli Glow® to apply depends on the UV index where you live. In general, you will need at least 6-8 coats for a first-time application.

Please refer to the Poli Glow® Application and Maintenance Guide for detailed guidance.
At least once per year, wash your boat with Poli Wash™, treat any oxidation spots, and re-apply 3-4 coats of Poli Glow® to maintain your glossy shine.

When Poli Glow® is first applied, it can last up to a year or more in certain
conditions.

However, Poli Glow® was never meant to be a one-time application. Eventually, the Poli Glow® surface will oxidize like any other product or structure left out in the elements (albeit more slowly than alternatives).

The reason to regularly maintain the Poli Glow® finish is to prevent oxidation and the need to do heavier work when it does finally break down.

If maintained properly, Poli Glow® can last five to six years, and the heavier work
can be avoided.

Where you live determines how often you should apply maintenance coats. Boats in tropical climates require more frequent maintenance than boats in temperate ones.

Please refer to the Poli Glow® Application and Maintenance Guide for detailed guidance and to review our Poli Glow® Coverage Chart.
What Is Poli Glow?

Are you a boat or RV owner? You've come to the right place! Learn how to easily protect and restore the shine on your fiberglass boat or RV with Poli Glow® - trusted by customers around the world for over 25 years!

Search