Free shipping on all orders over $50

POLI GLOW®<br>DELUXE KIT
POLI GLOW®<br>DELUXE KIT
POLI GLOW®<br>DELUXE KIT
POLI GLOW®<br>DELUXE KIT
poli glow, poliglow, fiberglass restoration, fiberglass, polish, wax, boat wax, boat polish, rv wax, rv polish, boat cleaning, rv cleaning, camper polish, camper wax, gelcoat restoration, gelcoat wax, gelcoat polish, clean, cleaning, shine, gloss, restoration, protection, seal, sealer, sealant, ceramic, silicone, sio2, spray coating, coatings, graphene, microfiber, towel, towels, gsm, drying towel, non-skid, anti-slip, water spots, interior detailer, waterless detailer, leather, conditioner, vinyl, cleaner
poli glow, poliglow, fiberglass restoration, fiberglass, polish, wax, boat wax, boat polish, rv wax, rv polish, boat cleaning, rv cleaning, camper polish, camper wax, gelcoat restoration, gelcoat wax, gelcoat polish, clean, cleaning, shine, gloss, restoration, protection, seal, sealer, sealant, ceramic, silicone, sio2, spray coating, coatings, graphene, microfiber, towel, towels, gsm, drying towel, non-skid, anti-slip, water spots, interior detailer, waterless detailer, leather, conditioner, vinyl, cleaner

POLI GLOW®
DELUXE KIT

  • $97.00
Shipping calculated at checkout.
About The Poli Glow® Deluxe Kit  If you own an older boat or RV, you know the headache that oxidation, stains, and rust cause. Oxidation occurs from the elements including UV radiation from the sun, moisture, and extreme temperatures. This...
This product is available.



About The Poli Glow® Deluxe Kit 

If you own an older boat or RV, you know the headache that oxidation, stains, and rust cause. Oxidation occurs from the elements including UV radiation from the sun, moisture, and extreme temperatures. This causes the gelcoat to break down, forming a chalky white residue on the surface. 

This residue is actually the breakdown of the polymers in the gel coat. The elements can also cause cracking or peeling and fading of the decals, and a bleached out look to the colors in the gelcoat. The oxidation is generally more extreme in darker-colored vehicles than in lighter colors. Your boat or RV now looks old and worn out.

Not good. As it degrades, the gelcoat loses its protective barrier and becomes even more porous, allowing water and dirt, or oil, gas, and other byproducts from the waterways and roadways to get in and damage and stain that precious gelcoat of your prized possession. 

To prevent oxidation and staining, you know you need to seal it with Poli Glow®. But before you seal it, you need to get rid of all that nasty oxidized gelcoat, stains, dirt, and grime, so Poli Glow® can penetrate into the pores of the gel coat and properly seal and protect your boat or RV. 



Introducing the Poli Glow® Deluxe Kit

This kit contains everything you need to remove the deteriorated layer and uncover the colors without damaging your boat or RV’s sensitive underlying fiberglass structure or stripping the decals. 

If you are looking to achieve superior color, shine, and protection for the surface of your boat or RV, see why Poli Glow® is considered by many to be “the best product on the market.”

Your boat or RV will receive unmatched protection from stains, oxidation, wax build-up, sun, and weather damage thanks to Poli Glow’s® proprietary formula, which provides protection through a water based polymer emulsion containing UV inhibitors.

If you’re hoping to restore the slick, shiny coat on an old boat or RV, Poli Glow® has you covered. Up to 12 months of protection with the first application…up to 6 years of protection with regular recommended maintenance applications of Poli Glow®.

Our Poli Glow® Kit is a tremendous all-in-one resource for boat and RV owners and professional detailers alike.

 
The Poli Glow® Deluxe kit includes: 

• 32-Ounce bottle of Poli Glow®

• 32-Ounce bottle of Poli Prep™

• 16-Ounce bottle of Poli Ox™ 

• Microfiber Poli-Mitt Applicator™

• Non-Abrasive Scrub Pad with Handle

• 2 Ultra-fine sanding pads (similar to 1200 grit wet/dry sandpaper)

• Latex gloves

• Instruction booklet 


The Power of Poli Glow® lies in its low maintenance properties for 5 to 6 years. All you have to do is wash your boat or RV with our Poli Wash product, and reapply 3-4 coats of Poli Glow® every year (see the coating chart below for more details). If you want to stop compounding and buffing every 3 to 6 months, then trust in the Power of Poli Glow® as many others on 6 continents have done!


Here from a few satisfied Poli Glow® customers:

"This product is the best thing I ever bought on Amazon. My 2004 39 foot motor home looks new again. It is a lot of work to get the oxidation off but applying the glow was easy. No buffing. Going up and down my ladder is the hardest part. Whole thing took two afternoons. Highly recommend." - Gary S.

"Easy to use and does a fantastic job on oxidised gel coat." -Scott W.



Directions for use:
  1. Wet your boat or RV’s surface with water.

  2. Dilute the Poli Prep concentrate at a 3:1 ratio of water to product and use a trigger spray bottle to apply. Scrub vigorously with the non-abrasive scrub pad with blue handle and then rinse thoroughly with water. Repeat as necessary.

  3. To remove the heavy oxidation or staining, moisten the ultrafine sanding pad with water and sprinkle Poli Ox onto the wet pad. Work the Poli Ox into the pad to avoid spillage. Scrub the area with the ultrafine sanding pad until the oxidation and staining has been removed.

  4. Rinse thoroughly with water.

  5. Repeat as necessary. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached until Poli Glow® has been applied.

  6. If any residue of Poli Ox remains, take a few ounces of Poli Prep® or Poli Wash in a bucket with 3-5 gallons of water and wash the surface with a soft-bristled brush. Rinse well with water. 

  7.  Let it air dry or use our 550 GSM Microfiber Towel to dry your vehicle.

  8. Once you have created a uniform, oxidation-free surface, your vehicle is now ready for Poli Glow® application! 

  9. Moisten the Poli-Mitt Applicator™ with water and wring out so that it is damp and not soaked.

  10. Shake well, and drizzle several lines of Poli Glow® onto the Poli-Mitt Applicator™. Wring gently to evenly distribute the Poli Glow®. Do not soak the mitt.

  11. Apply Poli Glow® in vertical or horizontal strokes and work in four to six foot sections.

  12. Poli Glow® should be applied in thin coats, allowing several minutes for each coat to dry in between applications. 

Please note: Please note: Refer to the Complete Guide To Poli Glow® for more detailed directions for use. Once all the surface has been prepped and the oxidation and staining has been removed, apply a minimum of 6 to 8 coats of Poli Glow. Please use the Coating Chart to help determine the number of coats you should apply based on the condition of the gelcoat and the temperature zone in which you live. 



When to purchase the Poli Glow® Deluxe Kit:
  1. If your boat or RV is dull and faded with moderate to severe oxidation and this is the primary application of Poli Glow®.

  2. If you have Poli Glow® on your vehicle that was not maintained well and you need to remove some oxidation without stripping all the Poli Glow (see Maintenance Guide).



My third year using Poli Glow on my 1987 Ericson 32. I think this stuff works great! 
- S. Pretti