This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

POLI-MITT™ APPLICATOR

The Poli-Mitt™ Applicator was designed to replace the 7″ hand-held chamois applicator.

Preparation of Poli-Mitt™ Applicator with Poli Glow®: Dampen the Poli-Mitt™ Applicator with fresh water, wring out, wrap in a towel, and again wring out the remaining moisture. During application, the Poli-Mitt™ Applicator may have to be rinsed out from time to time. Repeat the initial process and resume the application. The Poli-Mitt™ Applicator should be damp, not wet. Always wear rubber or plastic disposable gloves under the Poli-Mitt™.

Application of Poli Glow®: Drizzle several lines of Poli Glow® onto the palm of the Poli-Mitt™ Applicator. The Poli-mitt™ should be moist, not dripping wet. Apply Poli Glow® by wiping in one direction (similar to painting varnish), top to bottom, or side to side. Do not wipe in a circular motion; instead, work in a 4’x 6’ section. Each coat dries in approximately 1-2 minutes (depending on temperature). Apply 4 to 6 coats of Poli Glow® and move on to the next section.

Search