Universal Stainless Steel Hanger

Easy to use and easy to clean

It isn't just the mitt, it's the entire product line. I have tried for years and years to bring back the original color and shine and FINALLY got it Again, thank you!

Leaving in the Central-Valley of California, the sun take starts the oxidation quickly. I have a 13 year old trailer and the product made it look new. Easy to apply the Poli-Strip and the Poli -Glow.

I have been using Polyglow for 10 or more years now. As a comercial fisherman in Maine my boat is in the water and fishing year round, only hauling it out for a couple of days for annual maintenance. First let me say the product works great at keeping the hull looking like new as long as you follow the instructions. Second, when it comes time to remove the old polyglow use Zep floor wax stripper. You will hate yourself if you try the polyglow stripper. Finally I have used both the 7" applicator and the mitt. The mitt is faster but the product doesn't last as long on the hull. On a 40' boat I don't have time to get it 10+ coats. 5 coats with the applicator will do the same job. I hope this review helps.

This applicator is far better than the mitt provided with the kit. It puts on thinner coats and alleviates the build up of noticeable poliglow streaks. It also will grab some of the bugs and other dust items that accumulate on the surface as you're applying the poli-glow. I put water in a spray bottle, in fact, we had no water in yard at marina so I used lots of water in spray bottles and many, many towels, but I kept misting the applicator once every 3-5 linear feet of hull. This helped eliminate any build up and start and stop marks from the application. There's lots of positive and negative feedback on poli-glow. Removing old poli-glow was not fun. We had to use poli-strip and an orbital sander...however when reapplying I was stopped by many observers asking what I was applying to the hull because it had an incredible shine. It helped that the hull was very chalky prior to application due to the sanding. Even some of the marina employees were shocked how good it looked and how effortless the application was. Apparently they didn't watch me strip the old poli-glow! Be careful not to sand through the gel coat. I definitely recommend the applicator and poli-glow.

Amazing

Great product and it worked great!

Perfect for the task.

Marvelous!

Did start to separate from the wrist band before finishing half of the RV but contacted POLIGLOW and received a replacement in a few days. Excellent customer service response. Even thru in a bottle of POLIWASH form my trouble.