Poli Glow® Boat & RV Restoration Kit

Poli Glow® Boat & RV Restoration Kit: Maximize Your Craft’s Shine.

The Poli Glow polish is a high gloss sealer and surface restoration solution redefining the standard for caring for gelcoat and fiberglass recreational vehicles. The Poli Glow® Restoration Kit contains all the essential tools required to remove mild oxidation and achieve a stunning shine. Poli Glow® utilizes a water-based acrylic polymer formula that adheres seamlessly to the gelcoat, fiberglass or painted metal surfaces of your Boat, RV, camper, or trailer, providing a durable and glossy finish. With appropriate care, Poli Glow® can maintain its effectiveness for years to come.

**What's Included in the Kit:**
1. 32 oz. Bottle of Poli Prep®: Poli Prep® is a concentrated cleaning formula used to create a clean and uniform surface for applying Poli Glow®. It safely removes light to moderate oxidation, stains, grime, old wax, and other detailing products.
2. 32 oz. Bottle of Poli Glow®: This revolutionary Boat and RV polish and restorer penetrates and seals the surface, protecting it from oxidation, dirt, oil, moisture, and harmful UV radiation, and provides an unparalleled high gloss shine.
3. The Poli-Mitt® Applicator: A special coral fleece microfiber mitt designed specifically for applying Poli Glow®.
4. Non-Abrasive Scrub Pad with Handle: This white scrub pad is non-abrasive and easy to use. It quickly removes oxidation, dirt, grime, light staining, mold, mildew, and black streaks.

For an exceptional experience with the Poli Glow® Boat & RV Restoration Kit, proper preparation is key. Start by removing any oxidation using Poli Prep®. A well-prepared surface should be free from chalky material and look uniformly dull, with no color discrepancies, blotches, or stains. Keep in mind that the colors may appear bleached or faded until the transformative power of Poli Glow® is applied.

**General Application Instructions for the application of Poli Glow®:**
- Never apply in the rain or on windy days to ensure a flawless finish.
- Whenever possible, shield your project from direct sunlight.
- Ideal ambient temperatures range between 65°F and 90°F for optimal results.
- Aim for low to moderate humidity for enhanced application conditions.
- After applying, keep the surface protected from rain for 48 hours to ensure full curing.

**Instructions for use:**
1. Start by wearing disposable gloves to safeguard your hands.
2. Protect any bottom paint and ink-printed or silk-screened decals and graphics with plastic and tape to keep them safe.
3. Wet the surface with water to prepare for cleaning.
4. In a spray bottle, dilute the Poli Prep® concentrate at a 3:1 ratio (water to product). Generously spray the solution on the surface, scrub vigorously with the white non-abrasive scrub pad, allow the product to work for 1-2 minutes, and rinse thoroughly with water.
5. Repeat this process until all oxidation is eliminated—your satisfaction depends on it! Ensure your surface looks uniformly dull, free from any discoloration, blotches, stains, and chalkiness.
6. Allow the surface to air dry, or use our 550 GSM Microfiber Towel for a spotless finish.
7. Prepare the Poli-Mitt® Applicator by moistening it with water—be sure to wring it out until it's just damp.
8. Shake the Poli Glow® bottle well, then drizzle several lines onto the Poli-Mitt® Applicator. Wring gently to spread the product evenly—no soaking here!
9. Apply Poli Glow® with confidence using vertical or horizontal strokes (avoid circular motions) in manageable four- to six-foot sections.
10. For the best results, apply Poli Glow® in thin layers, allowing each coat to dry for a 1-2 minutes. Wait until the surface feels dry and no longer tacky before adding the next coat.
11. Total cure time is 48 hours. Avoid rain and do not put your Boat in the water until fully cured.

Poli Glow® Polish can be applied to:
• Gelcoat
• Fiberglass
• Clear Coat
• Pastic and acrylic surfaces
• Painted metal
• Rubber mouldings

Poli Prep® is not compatible with certain surfaces, including:
• Brand new, unoxidized surfaces that still shine
• Household acrylic and urethane-based paints
• Ink-printed or silk-screen decals and graphics

Now that Poli Glow® has been applied, maintenance is essential to give the finish longevity. It’s vital to understand that this is not a one-time solution. Over time, even Poli Glow® will undergo oxidation from exposure to the elements, though it does so more slowly than other products.

By committing to regular maintenance of the Poli Glow® finish, you can effectively stave off oxidation and minimize the need for future extensive labor intensive re-polishing work. Maintenance also protects the surface from damage. With the proper upkeep, Poli Glow® can last an impressive five to six years.

Maintenance of the Poli Glow® finish should be done at least annually. This includes washing the surface with Poli Wash®, removing stains with Poli Wash Pro®, and reapplying 3-4 coats of Poli Glow® to keep that beautiful Gloss That's Boss!

Keep in mind that where you live plays a significant role in how often you should reapply maintenance coats. If you're in a tropical area, you’ll want to be proactive, as these conditions demand more frequent attention than those in temperate climates.

For comprehensive instructions and insights, be sure to consult the Poli Glow® Application and Maintenance Guide and the Poli Glow® Coating Chart. By investing the time in proper care now, you’re ensuring your Boat or RV not only looks amazing but also lasts for years to come.