This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

This section doesn’t currently include any content. Add content to this section using the sidebar.

POLI GLOW® KIT

Superior Restoration of Color, Shine and Protection

Restore the original color, shine and protection to your older, oxidized, dull, and faded Boat/RV with the ultimate sealer and polish, Poli Glow. 

OR

If you have an older Boat/RV that is oxidized, dull and faded, Poli Glow will provide the ultimate in restoring the color, shine and protection to fiberglass and gelcoat finishes.

The Basic kit provides the tools you need to first remove mild oxidation, then apply high gloss shine. Remove the oxidized layer and transform the look of your older Boat/RV back to the original colors and shine. Protect it against oxidation and staining from dirt, oil, moisture, and harmful UV radiation, and apply the most brilliant shine on the market.

For over 25 years, Poli Glow® has sealed and protected Boats/RVs all over the world, keeping them looking glossy and new. It’s the #glossthatsboss.

  • Removes the chalky oxidized layer and stains

  • Restores the color and high gloss shine

  • Contains UV inhibitors to protect against sun damage

  • Brings faded colors back to life

  • Protects decals from cracking and fading

  • Is Hydrophobic, repelling  water and preventing stains

  • Is easy to apply without buffers

  • Maintains a shine for years with little annual maintenance

  • Easily wash off dirt and bug debris

Directions For Use
Maintenance Applications

For first time applications, the oxidation needs to be removed by prepping the surface with Poli Prep and Poli Ox. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached or faded until Poli Glow® has been applied.


  1. Wet the surface with water.

  2. Dilute the Poli Prep™ concentrate 3:1 water to product in a trigger spray bottle. Spray onto surface and scrub vigorously with the non-abrasive scrub pad with blue handle and then rinse thoroughly with water. Repeat as necessary until oxidation has been removed.

  3. For stubborn areas, moisten the ultra-fine sanding pad with water and sprinkle Poli Ox™ onto the wet pad. Scrub the fiberglass or gelcoat vigorously, and more gently over the decals.

  4. Rinse thoroughly with water. Repeat as necessary. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached until Poli Glow® has been applied.

  5. If any residue of Poli Ox™ remains, take a few ounces of Poli Prep® or Poli Wash™ in a bucket with 3-5 gallons of water and wash the surface with a soft-bristled brush. Rinse well with water.

  6. Let it air dry or use our 550 GSM Microfiber Towel to dry your vehicle.

  7. Moisten the Poli-Mitt Applicator™ with water and wring out so that it is damp and not soaked.

  8. Shake well, and drizzle several lines of Poli Glow® onto the Poli-Mitt Applicator™. Wring gently to evenly distribute the Poli Glow®. Do not soak the mitt.

  9. Apply Poli Glow® in vertical or horizontal strokes and work in four to six foot sections.

  10. Poli Glow® should be applied in thin coats, allowing several minutes for each coat to dry in between applications. Apply the next coat when the surface is not tachy or feel wet, about 1-2 minutes.

  11. Cures in 48 hours


  12. NUMBER OF COATS TO APPLY
    • 6-8 coats if you reside in zone 6 or 7
    • 10 coats in zone 5
    • 12 coats in zone 2-4
    • 13-15 coats in zone 1


    OPTIMAL WEATHER CONDITIONS
    • Do not apply in the rain or on windy days
    • Avoid direct sunlight
    • Temps between 65 and 90 degrees F
    • No rain for 48 hours after application

    NOTE: Avoid using Poli Prep and Poli Ox over Ink printed decals.


OPTIMAL WEATHER CONDITIONS

  • Do not apply in the rain or on windy days
  • Avoid direct sunlight
  • Temps between 65 and 90 degrees F
  • No rain for 48 hours after application


Re-Apply 3-4 Coats:
  • Every 12 months if you reside in Zone 6 or 7
  • Every 8-10 months in Zone 5
  • Every 6-8 months in Zone 1-4


NOTE: Avoid using Poli Prep and Poli Ox over Ink printed decals.

For first time applications, the oxidation needs to be removed by prepping the surface with Poli Prep and Poli Ox. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached or faded until Poli Glow® has been applied.

  1. Wet the surface with water.

  2. Dilute the Poli Prep™ concentrate 3:1 water to product in a trigger spray bottle. Spray onto surface and scrub vigorously with the non-abrasive scrub pad with blue handle and then rinse thoroughly with water. Repeat as necessary until oxidation has been removed.

  3. For stubborn areas, moisten the ultra-fine sanding pad with water and sprinkle Poli Ox™ onto the wet pad. Scrub the fiberglass or gelcoat vigorously, and more gently over the decals.

  4. Rinse thoroughly with water. Repeat as necessary. The surface should look uniformly dull without color changes or blotches. Some of the colors will still appear bleached until Poli Glow® has been applied.

  5. If any residue of Poli Ox™ remains, take a few ounces of Poli Prep® or Poli Wash™ in a bucket with 3-5 gallons of water and wash the surface with a soft-bristled brush. Rinse well with water.

  6. Let it air dry or use our 550 GSM Microfiber Towel to dry your vehicle.

  7. Moisten the Poli-Mitt Applicator™ with water and wring out so that it is damp and not soaked.

  8. Shake well, and drizzle several lines of Poli Glow® onto the Poli-Mitt Applicator™. Wring gently to evenly distribute the Poli Glow®. Do not soak the mitt.

  9. Apply Poli Glow® in vertical or horizontal strokes and work in four to six foot sections.

  10. Poli Glow® should be applied in thin coats, allowing several minutes for each coat to dry in between applications. Apply the next coat when the surface is not tachy or feel wet, about 1-2 minutes.

  11. Cures in 48 hours


  12. NUMBER OF COATS TO APPLY
    • 6-8 coats if you reside in zone 6 or 7
    • 10 coats in zone 5
    • 12 coats in zone 2-4
    • 13-15 coats in zone 1


    OPTIMAL WEATHER CONDITIONS
    • Do not apply in the rain or on windy days
    • Avoid direct sunlight
    • Temps between 65 and 90 degrees F
    • No rain for 48 hours after application

    NOTE: Avoid using Poli Prep and Poli Ox over Ink printed decals.

OPTIMAL WEATHER CONDITIONS
  • Do not apply in the rain or on windy days
  • Avoid direct sunlight
  • Temps between 65 and 90 degrees F
  • No rain for 48 hours after application


Re-Apply 3-4 Coats:
  • Every 12 months if you reside in Zone 6 or 7
  • Every 8-10 months in Zone 5
  • Every 6-8 months in Zone 1-4


NOTE: Avoid using Poli Prep and Poli Ox over Ink printed decals.
What Is Poli Glow?

Are you a boat or RV owner? You've come to the right place! Learn how to easily protect and restore the shine on your fiberglass boat or RV with Poli Glow® - trusted by customers around the world for over 25 years!

Search