Poli Grit® Non-Skid Boat Deck Sealer

Poli Grit®: Sealer and Polish for Non-Skid areas on Boat

Poli Grit® was developed by Boat owners who were frustrated with stained, oxidized, and worn non-skid areas on their vessels. This innovative product recreates the textured non-skid surface and transforms high-traffic surfaces on your Boat into durable and visually appealing areas. Poli Grit® increases traction, seals the surface, providing superior protection, and restores a high gloss shine to your non-skid surfaces.

With Poli Grit®, you no longer have to deal with sticky fish debris, unsightly rust stains, chalky gelcoats, or ingrained sand.

**What's Included in the Kit:**
- Poli Grit® Bottle A: A textured sealer to recreate the traction on the non-skid areas.
- Poli Grit® Bottle B: A durable polish and restorer that seals the surface, protecting it from oxidation, dirt, oil, moisture, and harmful UV radiation, and provides an unparalleled high gloss shine.
- 1 Roller Handle
- 2 Short Nap Roller Covers
- 1 Pan

Before using Poli Grit®, prepare the Boat's non-skid areas with Poli Prep® and Poli Ox® to remove oxidation and stains, similar to how you would treat the hull.

Poli Grit® is applied in a straightforward two-step process:
Step 1: Use Bottle A to add texture and grip, enhancing safety where it is needed most.
Step 2: Use Bottle B to seal the gelcoat of the non-skid areas, protecting them from oxidation, stains, and wear.

**Directions for Use**:
1. Moisten one of the nap roller covers with water and wring out the excess until it is damp but not soaked. Attach it to the roller handle.
2. Shake Poli Grit® Bottle A well and pour several ounces into the tray. Refill as needed.
3. Moisten the roller with the solution, ensuring it is damp but not soaked.
4. Apply one coat to the surface. If bubbles appear, lightly roll over them with the roller. Allow 10-15 minutes for this coat to dry. Repeat if more texture is desired.
5. Wash out the tray with warm water and let it drain.
6. Moisten a second nap roller cover and attach it to the roller handle. Shake Poli Grit® Bottle B well and pour several ounces into the tray. Refill as needed.
7. Moisten the roller with the solution, but do not soak it.
8. Apply 10 thin coats of Bottle B, allowing several minutes for each coat to dry between applications.
9. Allow 48 hours for the Poli Grit® to fully cure before use.

When Poli Grit® is first applied, it can last up to a year or even longer under optimal conditions. It's essential to understand that Poli Grit® is not designed for a one-time application. Like any surface exposed to the elements, the Poli Grit® surface will naturally oxidize over time. To maintain its exceptional finish and prevent oxidation, we strongly recommend applying a few maintenance coats of Poli Grit® annually. This approach will safeguard your investment and eliminate the need for extensive prep work down the line.

With regular maintenance, you can confidently expect Poli Grit® to last between five to six years, significantly reducing the frequency of heavy prep work.

We recommend washing your Boat once a year with Poli Wash® and reapplying one coat of Poli Grit® from bottle A, followed by 3-4 coats from bottle B to maintain that brilliant glossy shine. Keep in mind that the number of maintenance coats you require may vary by location, with Boats in humid, equatorial climates needing more frequent attention.

You should consider purchasing a Poli Grit® Kit if:
- The non-skid areas of your Boat show signs of oxidation that need sealing and protection.
- The non-skid surfaces are worn and require additional texture for optimal traction.
- You've previously purchased a Poli Grit® Kit, but your non-skid area exceeds 50 square feet.
- It's time to incorporate maintenance applications into your non-skid areas.

By following these guidelines, you can ensure the optimal performance and longevity of your Boat’s surfaces.